Leaky Sink Drain Fixed - Bad P-Trap and Worn Seals Replaced

A leaky sink and a slow drain showing up at the same time is never a coincidence. Nine times out of ten, it means something underneath has been failing for a while - and if you leave it, you're just waiting for a bigger mess to deal with.

Here's what we were working with on this one: a leaking drain line, a P-trap that had been installed incorrectly, and seals that were well past done. That worn seal you can see pulled out tells the whole story - it was cracked and breaking down, which is exactly why water was finding its way where it shouldn't. These kinds of failures don't fix themselves.

We straightened out the P-trap, replaced the bad seals, and repaired the drain line. Then we ran our RIDGID drain machine through the line to clear it out and make sure everything was flowing the way it should. That last step matters. There's no point in fixing a leak and leaving a slow drain behind.

The difference between a sloppy repair and a solid one is whether you actually address everything that's wrong - not just the part that's obviously dripping. A P-trap that's not seated right will keep leaking no matter how many times you tighten the fittings. Getting it corrected properly is the only way to actually solve the problem.

If your sink is draining slowly, leaking underneath, or doing both - that's your cue to get someone in before the cabinet floor starts showing water damage. These repairs are straightforward when you catch them early.